Shop by Category

Dixie 46 246 462 Magneto Parts List

 

Here is a parts list for the earlier brass sided Dixie Aero.These were used briefly on the Waterloo Boy and early McCormick Deering. The 246 is similar to the rest but is made for a two cylinder installation by using a special cap that shorts two of the four high tension leads to ground.

46c-parts-list-skinny-p1.png

 

Here is the later 46T with the pot metal sides and the EM impulse starter. These were used by John Deere briefly(fortunately) on the model D. Handle with extreme care, pot metal often is crumbly.

46-t-em-skinny-p1.png

 

Note below that John Deere used a special distributor cap that shorted two adjacent high tension leads together leaving two leads that fired 90 degrees apart to run like a Deere.

46-t-em-skinny-p2.png

 

 

46t-stm-impulse-skinny-p1.png

46t-stm-impulse-skinny-p2.png

46t-stm-impulse-skinny-p3.png

46t-stm-impulse-skinny-p4.png

46t-stm-impulse-skinny-p5.png

46t-stm-impulse-skinny-p6.png

 

 

 

There are no products listed under this category.