Shop by Category

Eisemann AM magneto Instructions and Parts 1947

Here is an instruction and parts manual for the Eisemann AM series magnetos from 1947 to keep your in top form.

 

am-instr-parts-1947-skinny-pi.png

 

 

am-instr-parts-1947-skinny-piii.png

 

 

am-instr-parts-1947-skinny-pv.png

 

am-instr-parts-1947-skinny-pvii.png

 

 am-instr-parts-1947-skinny-p1.png

 

 

am-instr-parts-1947-skinny-p2.png

 

am-instr-parts-1947-skinny-p3.png

 

am-instr-parts-1947-skinny-p4.png

 

am-instr-parts-1947-skinny-p5.png

 

am-instr-parts-1947-skinny-p6.png

 

am-instr-parts-1947-skinny-p7.png

am-instr-parts-1947-skinny-p8.png

 

am-instr-parts-1947-skinny-p9.png

 

 am-instr-parts-1947-skinny-p10.png

 

Soldering the ends of the plug wire terminals is a good practice. It assures a positive electrical connection between the wire and the cap and prevents the wire end from coming off the wire.

 

When servicing wash and repack the ball bearings with a good molybdenum based grease or equivalent that stay put and not fling out. Molybfenum based front axle bearing grease has been the industry standard but there may something new with even better retention.

am-instr-parts-1947-skinny-p11.png

 

 

am-instr-parts-1947-skinny-p12.png

 

am-instr-parts-1947-skinny-p13.png

 

am-instr-parts-1947-skinny-p14.png

.

 

am-instr-parts-1947-skinny-p15.png

 

am-instr-parts-1947-skinny-p16.png

 

am-instr-parts-1947-skinny-p17.png

 

am-series-parts-svc-skinny-p18.png

am-series-parts-svc-skinny-p19.png

 

am-instr-parts-1947-skinny-p20.png

 

am-instr-parts-1947-skinny-p21.png

 

am-instr-parts-1947-skinny-p22.png

 

am-instr-parts-1947-skinny-p23.png

 

am-instr-parts-1947-skinny-p24.png

 

am-instr-parts-1947-skinny-p25.png

 

am-instr-parts-1947-skinny-p26.png

 

am-instr-parts-1947-skinny-p27.png

 

am-instr-parts-1947-skinny-p28.png

 

am-instr-parts-1947-skinny-p29.png

 

am-instr-parts-1947-skinny-p34.png

There are no products listed under this category.